HP StorageWorks NAS 1000s Quick Start Guide

42 NAS 1000s Quick Start Guide
j. Do not shutdown or restart the system until the Mirroring
of C: or E: is complete. The system can be shutdown
while the Data volume is still regenerating, but will have
to be restarted once the system comes up. To do this,
right-click on the new disk, Disk 1 in this example, and
select Reactivate Disk as shown in Figure 14.
Figure 14: Selecting Reactive Disk
k. After the drives are repaired and the system has been
rebooted, right-click on the Missing disk and select
Remove Disk if it is still being displayed in the Disk
Management MMC.