NAS 2000s Install Poster

See other side
hp StorageWorks
NAS 2000s
NAS 2000s Installation Instructions
First Edition (September 2003)
Part Number: 345648-001
© Copyright 2003 Hewlett-Packard Development Company, L.P.
Hewlett-Packard Company makes no warranty of any kind with regard to
this material, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose. Hewlett-Packard shall
not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this
material.
This document contains proprietary information, which is protected by
copyright. No part of this document may be photocopied, reproduced,
or translated into another language without the prior written consent of
Hewlett-Packard. The information contained in this document is subject to
change without notice.
Product names mentioned herein may be trademarks of their respective
companies as reflected by an associated footnote.
Hewlett-Packard Company shall not be liable for technical or editorial
errors or omissions contained herein. The information is provided “as is”
without warranty of any kind and is subject to change without notice. The
warranties for Hewlett-Packard Company products are set forth in the
express limited warranty statements for such products. Nothing herein
should be construed as constituting an additional warranty.
Installation
Instructions
345648- 001
About this Document
This document gives detailed instruction on the installation of the
HP StorageWorks NAS 2000s into HP-branded racks and
third-party racks. It provides the following installation
information:
■ Selecting a Site
■ Rack Planning Resources
■ Identifying the Server Shipping Carton Contents
■ Installing Options
■ Installing the Server into the Rack
■ Server Description
■ Optional External Storage Enclose
■ Powering Up and Configuring the Server
■ Registering the Server
For more information on the server, refer to the QuickSpecs at
www.hp.com.
Selecting a Site
Select an installation site that meets the following requirements:
■ Space
■ Temperature
■ Power
■ Rack
■ Grounding
■ Airflow
Rack Planning Resources
The rack resource kit ships with all HP-branded racks. If you
intend to deploy and configure multiple servers in a single rack,
refer to the white paper on high-density deployment in
HP-branded racks at
www.hp.com.
Identifying the Server Shipping Carton
Contents
Unpack the server shipping carton and locate the materials and
documentation necessary for installing the server. All the
rack-mounting hardware necessary for installing the server into
the rack is included with the rack or the server.
The contents of the server shipping carton include:
■ Server
■ Printed setup documentation and software products
■ Power cord
■ Rack-mounting hardware
In addition to these supplied items, you may need:
■ Application software diskettes
■ Options to be installed
Installing Option
Install any hardware options before initializing the server. For
options installation information, refer to the option
documentation. For server-specific information, refer to the
Supplemental Setup booklet.
Installing the Server into the Rack
Follow the steps in this section if you are installing the server into
an HP-branded rack or a third-party rack with square holes. If
you are installing the server into a rack with round holes, order
the appropriate rack installation option kit, and then refer to the
installation instructions that ship with the option kit for more
information.
Note: The steps in this section work with most third-party racks with
square holes. If they do not work with the rack you are using, order the
option kit for racks with round holes.
If you are installing the server into a Telco rack, order the
appropriate option kit at www.racksolutions.com/hp.
Follow the server-specific instructions on the website to install
the rack brackets.
After installing the brackets, follow the steps in this section.
WARNING: When installing a server in a Telco rack, be
sure that the rack frame is adequately secured to the top
and bottom of the building structure.
1. Mark the rack.
Caution: Always plan the rack installation so that the
heaviest item is on the bottom of the rack. Install the
heaviest item first, and continue to populate the rack from
the bottom to the top.
Note: Rack components are removed for clarity.
2. Secure each server rail to the server.
3. Secure the left and right standard rack rails to the appropriate
side of the rack.
WARNING: To reduce the risk of personal injury or
equipment damage, be sure that the rack is adequately
stabilized before sliding the server rails into the rack rails.
Caution: Be sure to keep the server parallel to the floor
when sliding the server rails into the rack rails. Tilting the
server up or down could result in damage to the rails.
4. Extend the slides from the standard rack rails and then slide
the server rails into the slides.
1 Left and right standard rack
rail assemblies
2 Server rails
3 Rack template
4 Cable management arm