NAS b2000 - Quick Start Guide

Before You Begin
2-2 NAS B2000 Quick Start Guide
COMPAQ CONFIDENTIAL
Writer: Darrell Washington File Name: c-ch2 Before You Begin.doc
Codename: Collins Part Number: 292283-001 Last Saved On: 5/24/02 8:54 AM
Table 2-1: Configuration Information
Part A: To be completed for DHCP and non-DHCP configurations
Server Host Name:
Remote Insight
Lights-Out Edition
board Name:
Remote Insight
Lights-Out Edition
board Default User:
Password:
Note: If NIC teaming is to be implemented, determine which ports will be
teamed. Configure these Ethernet ports for DHCP protocol. For more
information, refer to the Ethernet teaming features and procedures section of
administrative procedures in the administration guide.
Part B: To be completed for non-DHCP configurations only
DNS Servers IP Address
1
2
3
NAS NIC Port* IP Address Subnet
Mask
Gateway
Address
Eth 0
Eth 1
Remote Insight
Lights-Out Edition
board Eth
* The default NAS B2000 has two Ethernet ports available for network
connectivity. Disable ports that will not be used. Each Ethernet port must be
configured with a separate subnet.
continued