NAS Executor e7000 v1 - Quick Start Guide

Before You Begin

Compaq StorageWorks NAS Executor E7000 Quick Start Guide 2-3

COMPAQ CONFIDENTIAL

Writer: Mark Garza File Name: c-ch2 Before You Begin.doc

Codename: Eusebio Part Number: 259129-001 Last Saved On: 10/10/01 10:02 AM

Table 2-1: Initialization Information continued

Part B: To be completed for non-DHCP configurations only

DNS Servers IP Address

NAS NIC Port* IP Address Subnet Mask

Eth 0

Eth 1

Eth 2

Eth 3

Remote Insight Board

Eth

* The default NAS E7000 has four Ethernet ports available for network

connectivity. Do not configure ports that will not be used. Each Ethernet port

must be configured with a separate subnet.

Note: If NIC teaming is to be implemented, determine which ports will be

teamed. Configure these Ethernet ports for DHCP protocol. For more

information, refer to the Ethernet teaming features and procedures section of

“Administrative Procedures” in the administration guide.

Part C: SNMP Information (optional)

Trap Destination (IP Address)

Manager Client:

Management Traps Community

String:

System Management Community

String: