NAS Executor e7000 v1 - Quick Start Guide

Configuration Setup
3-4 Compaq StorageWorks NAS Executor E7000 Quick Start Guide
COMPAQ CONFIDENTIAL
Writer: Mark Garza File Name: d-ch3 Configuration Setup.doc
Codename: Eusebio Part Number: 259129-001 Last Saved On: 10/12/01 9:07 AM
1
2
3
4
5
654321
Figure 3-1: NAS E7000 Ethernet connectors
Table 3-1: Ethernet Network Connectors
Item Description
NIC Ethernet port 3 (Eth 3) used for
data
NIC Ethernet port 2 (Eth 2) used for
data
NIC Ethernet port 1 (Eth 1) used for
data or cluster heartbeat
NIC Ethernet port 0 (Eth 0) used for
management
Remote Insight Lights-Out Edition
board Ethernet port (RIB Eth)
Note: Connect a loopback cable to any of the NAS E7000 Ethernet ports
(Eth 0 through Eth 3) that is not configured for use. Do not connect a
loopback cable to the Ethernet port on the Remote Insight Lights-Out Edition
board (RIB Eth).