NAS Executor e7000 v1 - Quick Start Guide

Configuration Setup
3-8 Compaq StorageWorks NAS Executor E7000 Quick Start Guide
COMPAQ CONFIDENTIAL
Writer: Mark Garza File Name: d-ch3 Configuration Setup.doc
Codename: Eusebio Part Number: 259129-001 Last Saved On: 10/12/01 9:07 AM
10. Follow the instructions on the screen to input the correct information. Verify that
your information is correct when the configuration review screen is displayed as
shown in Figure 3-5.
11. Click the Online icon to save the network information to the NAS E7000.
Figure 3-5: Rapid startup configuration review screen
12. Click the Finish icon to exit Rapid Startup. Close the browser window. The
NAS E7000 will now reboot to set the configuration information.
13. If the NAS E7000 is being deployed in a cluster configuration, go back to the
RapidLaunch program and select the next unconfigured NAS device to be used
within the cluster and repeat steps 8-12 for the second node.
14. Exit RapidLaunch and remove the RapidLaunch CD from the CD-ROM drive
and store it in a secure location.
15. For cluster deployments only. Once the second node has been configured with
Rapid Startup, close the browser window and follow the procedures of the CST
documented in Chapter 4, “Cluster Setup Tool.”