NAS Executor e7000 v1 - Quick Start Guide

Configuration Setup
Compaq StorageWorks NAS Executor E7000 Quick Start Guide 3-13
COMPAQ CONFIDENTIAL
Writer: Mark Garza File Name: d-ch3 Configuration Setup.doc
Codename: Eusebio Part Number: 259129-001 Last Saved On: 10/12/01 9:07 AM
CAUTION: To avoid damage to the system configuration, do not interrupt the
initialization process once it has begun. The initialization process takes
approximately 10 minutes to complete.
After initialization is complete, remove the configuration data diskette from the
diskette drive and place it in a secure location with the RapidLaunch CD.
For cluster deployments only. Once both nodes have been configured, follow the
CST procedures documented in Chapter 4, Cluster Setup Tool.
Completing the System Configuration
After the initialization process, there are additional tasks required in order to begin
sharing files on the network. All procedures for the configuration tasks may be found
in the NAS E7000 administration guide. These include the following:
Changing the system date and time
Configuring storage
Establishing file shares and create access permissions
In addition to the required configuration steps above several optional tasks may need
to be completed:
Enabling additional protocols and the associated file shares
NIC teaming