hp StorageWorks NAS e7000 v2 Maintenance and Service Guide

Connectors, LEDs, and Switches

102 NAS e7000 v2 Maintenance and Service Guide

Figure 71: Internal PCI Hot Plug LEDs and button

Table 26: Internal PCI Hot Plug LEDs and Button

Item Description Status

Slot fault LED Amber = Slot requires attention. There may be a

problem with the slot, the PCI board, or the driver.

Check the green LED before opening the slot.

Off = Slot does not require attention.

Slot power LED Green = Power is applied to the slot. Do not

open.

Blinking green = Power to slot is being turned off

or on. This process may take several minutes. Do

not open the slot release lever until the green LED

is completely off. Do not open.

Off = You may replace or remove a board in this

slot only.

3 PCI Hot Plug button (port)

Note: If the any of the LEDs indicates an error, refer to the

HP StorageWorks NAS e7000 v2

Administration Guide

for information on PCI-X technology and troubleshooting.