HP StorageWorks P9000 Performance Advisor Software v5.3 Install Guide (T1789-96323, August 2011)

2. Right-click HP StorageWorks P9000 Performance Advisor Tomcat service and select Start from
the drop-down list.
If you have configured the HP StorageWorks P9000 Performance Advisor Monitor service to
automatically restart the tomcat service, it tries to restart the tomcat service for the retry count you
specified in the PAMonitor_mail.properties file available in the <Install_drive>:\HPSS\
paMonitor\conf folder on your management station. Then, it sends an email notification that
describes whether the restart tomcat service was a success or a failure. For more information on
configuring the HP StorageWorks P9000 Performance Advisor Monitor service to restart the tomcat
service, see the HP StorageWorks P9000 Performance Advisor Software User Guide.
Verifying the fully qualified server name or IP address of the management station
Manually verify and confirm if the fully qualified server name or IP addres of the management station
provided in the paxp_service.properties file is correct. The paxp_service.properties
file is available in the <Hostagent_Home>\config folder on your host system. <Hostagent_Home>
translates to the location where you installed the host agent. Ensure that you modify and save the
corrections, and restart the HP StorageWorks P9000 Performance Advisor Hostagent service. For
information on restarting host agent services, see Appendix B.
Following is a sample paxp_service.properties file in which the
ManagementStation.Hostname shows 01.01.01.01 as the management station IP address:
#com.hp.xpsl.hostagent.HostAgent
######################################################################
ManagementStation.Hostname=01.01.01.01
Changing the HTTP port number
To change the HTTP port number, complete the following steps:
On the management station
1. Look for the following tag in the server.xml and manually replace the existing port number
with the new port number:
<Connector port="Existing_port_num" protocol="HTTP/1.1"
connectionTimeout="20000" redirectPort="443"/>
The server.xml is available in the <Installation_Drive>:\HPSS\pa\tomcat\conf
folder on your management station.
2. Restart the HP StorageWorks P9000 Performance Advisor Tomcat service.
On the host agent
Complete the following steps to manually update the new port number of the management station on
the host agent side also:
1. If Windows host agent, open the paxp_service.properties file from the <Installa-
tion_Drive>:\Program Files\Hewlett-Packard\xppa\hostagent\config folder
on your host system. If it is a custom install location, the file is available in the <Installa-
tion_Drive>:\<Installation_Directory>\hostagent\config folder.
If UNIX host agent, open the paxp_service.properties file from the <Installa-
tion_Drive>:\opt\xppa\hostagent\config folder on your host system.
2. Replace the existing port number in the http.port field with the new port number of the man-
agement station with which your host agent should communicate.
Troubleshooting P9000 Performance Advisor installation related issues136