HP StorageWorks P9000 Performance Advisor Software v5.3 User and Troubleshooting Guide (T1789-96322, August 2011)

7. Click New under Application and provide the application name. If you want to associate an
existing application with the selected WWN and host, choose the application from the Existing
list under Application Name.
The following image shows the Configure Application dialog box for 53036, which belongs to
the P9500 Disk Array type.
The following are the possible combinations:
• Associate a new application with a new host.
• Associate a new application with an existing host.
• Associate an existing application with an existing host. To associate an existing application
with a new host or an existing host, click Existing under Application and select the application
name from the list.
There may be cases where the LDEVs associated with an application are made available
through two hosts that belong to different WWNs. In such cases, you may want to associate
the application with both the hosts. If you want to associate an existing host with a new or
an existing application, click Existing and select the host name from the list. There may be
cases where the same set of LDEVs are made available through one host to two different ap-
plications. In such cases, you may want to associate the host with both the applications.
• Associate an existing application with a new host.
8. Click Add/Remove.
You are shown an informational message that the application settings are saved.
9. Click Close to come back to the Troubleshooting screen.
HP StorageWorks P9000 Performance Advisor Software User Guide 353