HP StorageWorks P9000 Performance Advisor Software v5.3 User and Troubleshooting Guide (T1789-96322, August 2011)

10. Click the + sign for the XP or the P9000 disk array in the component selection tree to view the

following structure in the order mentioned:

1. Application name

2. Host name

3. WWN

The following image shows the application name, host name, and the WWN for 53036, which

belongs to the P9500 Disk Array type.

Related Topics

• “Removing association between application and hosts” on page 354

• “Viewing performance or usage data for components” on page 356

• “Searching for applications associated with components” on page 355

• “Viewing variations in the LDEV response time” on page 364

• “Plotting charts” on page 365

Removing association between application and hosts

To remove the association between an application and the corresponding host and WWN:

1. Click Troubleshooting in the left pane.

The list of the XP and the P9000 disk arrays monitored by P9000 Performance Advisor are

displayed in the component selection tree under Troubleshooting.

2. Click the + sign for the XP or the P9000 disk array, for which you want to remove the association

between the application and the corresponding host and WWN.

3. Click Configure Application.

The Configure Application dialog box appears.

4. Click Remove.

5. From the Existing list under Application Name, select the application that you want to remove.

6. Click Add/Remove.

You are provided an informational message that the application settings are removed.

7. Click Close to come back to the Troubleshooting screen.