HP XP P9000 Performance Advisor Software v5.5 Command-line User Interface Reference Guide (T1789-96338, February 2013)

Specify the item value, for example an LDEV number or Port ID.–mval <Item Value>
Specify the start time in the format mm.dd.yyyy hh:mm:ss.–st <mm.dd.yyyy hh:mm:ss>
Specify the end time in the format mm.dd.yyyy hh:mm:ss.–et <mm.dd.yyyy hh:mm:ss>
The class for the time constraints.–tclass <Time Class>
Valid arguments are:
posted Time constrained by the posted time.
updated Time constrained by the updated time.
dispatched Time constrained by the updated time.
Can be used in place of –auth.
NOTE: The password file must be created using the encrypt command only.
–pf <password file>
Specify the delimiter for delimited output. Used with –list and –details.–d<delim>
Displays data in a readable format. Used with –list and –details.–hr
Prints the usage statement.–?
NOTE: The following metrics are applicable for mainframe volumes only:
CFW_TOTAL LDEV IO type
CFW_READ LDEV IO type
CFW_READ_CACHE LDEV IO type
CFW_WRITE LDEV IO type
CFW_WRITE_CACHE LDEV IO type
DFW_COUNT LDEV IO type
DFW_NRML_COUNT LDEV IO type
DFW_SEQ_ACCESS LDEV IO type
DFW_WRITE_HITS LDEV IO type
DFW_SA_WRITE_HITS LDEV IO type
Example
alarmhist —hr
PORT
Syntax
port [-d<delim>] [-L] [-hr] [-ms <URL>] [-auth <user:passwd>] -dkc
<serial #> -port <port ID> [-?]
Supported disk array types
XP and P9000 disk arrays
Description
Displays the port performance data. It lists the maximum, average, and minimum I/Os and MBs
per second for a given array.
Switches
Required. Specify the array serial number.–dkc <serial #>
Specify the delimiter for delimited output. There is no space between -d and the delimiter.–d<delim>
PORT 25