HP XP P9000 Performance Advisor Software v6.0 Command-line User Interface Reference Guide

Acp M MP 1,Acp M MP 2,Acp M MP 3,Acp M MP 4,Acp M MP 5,Acp M MP 6,Acp M MP 7,
Acp N MP 0,Acp N MP 1,Acp N MP 2,Acp N MP 3,Acp N MP 4,Acp N MP 5,Acp N MP 6,
Acp N MP 7,Acp X MP 0,Acp X MP 1,Acp X MP 2,Acp X MP 3,Acp X MP 4,Acp X MP 5,
Acp X MP 6,Acp X MP 7,Acp W MP 0,Acp W MP 1,Acp W MP 2,Acp W MP 3,Acp W MP 4,
Acp W MP 5,Acp W MP 6,Acp W MP 7,SM Bus,CM Bus,
Cache Usage (MB),Cache Size (MB),Cache Pending (MB),Cache Side File (MB)
XP 12000,10055,21:15:00,05/12/2010,50-09-74/00,01.14.02,0,0,0,0,0,0,0,0,31,80,0,0,0,1,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,23,30,23,30,20,30,23,30,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,23,30,23,30,20,30,23,30,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,
0,5832,16384,3,0
dkcs -dkc 10055
XP 12000,10055,21:20:00,05/12/2010,50-09-74/00,01.14.02,0,0,0,0,0,0,0,0,32,59,0,0,0,1,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,4,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,20,26,20,26,19,26,20,26,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,20,26,20,26,19,26,20,26,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,
5832,16384,2,0
In the –dkcs script output for an XP10000 array, the mix CHIPs displays utilization for only 4
MPs, even though there are 8 MPs on that board. Similarly, the MIX ACPs displays utilization for
only 4 MPs.
The following are the output data samples for the —dkcs script for an XP10000 array:
Array Type: XP 10000
Serial #: 80029
Record Time: 17:35:00
Record Date: 07/29/2005
Micro Code: 50-03-96/00
Raid Manager Lib: 01.10.04
Chip Data: ACP Data:
MIX-A = 16% 0% 0% 0% MIX-A = 0% 0% 0% 0%
B = 0% 0% 0% 0% 0% 0% 0% 0% MIX-F = 0% 0% 0% 0%
MIX-F = 0% 0% 0% 0%
E = 0% 0% 0% 0% 0% 0% 0% 0%
SM Bus = 0% Cache Usage = 39MB
CM Bus = 0% Cache Size = 8192MB
Cache Pending = 0MB
Cache Side File = 0MB
In the –dkcs script output for an XP24000 array, the output for the headers Chip Data displays
as <CHIP Name>U for upper, and <CHIP Name>L for lower. For example, CHIP E Upper displays
as EU.
The ACP data displays as <ACP Name>U for upper and <ACP Name>L for lower. For example,
ACP A Upper displays as AU.
The following is an example of the output data of the –dkcs script for an XP24000 array:
dkcs -hr -dkc 10001
Array Type: XP 24000
Serial #: 10001
Record Time: 16:30:00
Record Date: 03/30/2007
Micro Code: 60-00-20/00
Raid Manager Lib: 01.12.03
Chip Data: ACP Data:
EU = 0% 0% 0% 1% AU = 0% 0% 0% 0%
EL = 0% 0% 0% 0% AL = 0% 0% 0% 0%
FU = 0% 0% 0% 0% BU = 0% 0% 0% 0%
FL = 0% 0% 0% 0% BL = 0% 0% 0% 0%
GU = 0% 0% 0% 0% LU = 0% 0% 0% 0%
GL = 0% 0% 0% 0% LL = 0% 0% 0% 0%
HU = 0% 0% 0% 0% KU = 0% 0% 0% 0%
HL = 0% 0% 0% 0% KL = 0% 0% 0% 0%
DKCS 55