P9000Watch and P9000Sketch Reference guide for HP StorageWorks P9000 Performance Advisor v5.3 (T1789-96325, August 2011)
Valid rangeDefault valueFunctionsSettings
5 - 300 seconds10 seconds
Enables you to specify the frequency at which the performance
data of a disk array should be archived in the .csv file.
NOTE:
By default, the archival frequency is 10 seconds in the
Interactive and CLI modes, where the data is archived every
10 seconds. You can specify a minimum of 5 seconds or a
maximum of 300 seconds as the archival frequency. The new
archival frequency is automatically used in the CLI mode also,
if –a option is not specified.
For example, if you change the archival frequency to 5
seconds in the Interactive mode and then run the P9000Watch
in the CLI mode without specifying –a option, the performance
data is archived in the .csv file every 5 seconds.
Archival
Frequency
P9000Watch and P9000Sketch Reference Guide 41