Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 17

elxocmcore-esxNN-<kit version>

Where NN is 40 for an ESX 4.0 system or 41 for an ESX 4.1 system.

3. Type:

rpm -e elxvmwarecorekit-<kit version>

rpm -e elxocmcore-esxNN-<kit version>

Where NN is 40 for an ESX 4.0 system or 41 for an ESX 4.1 system.

In Linux

Prerequisites

For existing systems install the following drivers before installing the OneCommand Manager application

CLI:

On LP21000 series adapters and OneConnect FCoE adapters:

• Linux driver version 8.2.0.33.3p or later (For RHEL5 and SLES10 operating systems.)

• Linux driver version 8.3.5.X (For RHEL6 and SLES 11 SP1 operating systems.)

On OneConnect iSCSI adapters:

• iSCSI driver

On OneConnect NIC adapters:

• NIC driver

• Use the latest or matching driver from the Emulex website.

For new systems, the specific driver rpm file for your Linux version must be installed.

Procedures

To install the OneCommand Manager application CLI:

1. Copy the applications kit tar file to a directory on the installation machine.

2. Change to the directory where you copied the tar file.

Note: The RHEL 6 Enterprise kit requires the intallation of the libstdc++-5.so library. This

library is available through the compat-libstdc++-33-3.2.3-68.<arch>.rpm or later. The

PPC and x86_64 builds require the 64bit version which is installed in

/usr/lib64.The i386 build requires the 32bit version which is installed in

/usr/lib.

Note: The NIC driver must also be installed if the adapter personality is iSCSI-NIC or

FCoE-NIC.

Note: On RHEL 5.5, RHEL 5.6 and RHEL 6, the OneCommand Core rpm file requires the

“Libnl” library. This library is not installed by default, but can be obtained from the OS

distribution media.

• For i386 RHEL 5.5, RHEL 5.6 and RHEL 6, use the 32bit libnl library.

• For x86_64 RHEL 5.5, RHEL 5.6 and RHEL 6, use the 64bit libnl library.

• For ia64 RHEL 5.5, RHEL 5.6 and RHEL 6, use the 64bit libnl library.

• For PPC RHEL 5.5, RHEL 5.6 and RHEL 6, use the 32bit libnl library.