Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 263
Unwanted remote servers appear in the
OneCommand Manager application.
To remove out-of-band (TCP/IP) managed systems:
1. From the main menu, select Discovery-->TCP/IP--
>Remove Host(s)...
2. Select all hosts that you would like to stop discovering.
3. Select Remove.
4. Click Done to exit.
To remove in-band (FC) managed systems:
1. Log into the remote systems that you would like to stop
discovering.
2. Stop the elxhbamgr processes:
• Windows: Stop the "Emulex HBA Management" service.
• Linux: Run the /usr/sbin/ocmanager/stop_ocmanager script.
• Solaris: Run the /opt/ELXocm/stop_ocmanager script.
The OCM CLI command to
"GetDriverParamsGlobal" implicitly returns
the permanent (i.e. across reboots) values of
the global driver parameters. The temporary
global value is only returned if there is no
current assignment of the permanent global
value.
If you want the current (temporary) value of the adapter driver
parameter, use the "GetDriverParams" command instead of the
"GetDriverParamsGlobal" command.
Table 7: Emulex Driver for Linux and OneCommand Manager Application Situations (Continued)
Situation Resolution