Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)
The OneCommand Manager User Manual Page 71
• SCSI Read KB Count - The total number of kilobytes read.
• SCSI Status Errors - The number of SCSI status errors sent to the initiator.
• SCSI Queue Full Errors - The number of QFULL errors sent to the initiator.
• SCSI Sense Errors - The number of times sense data was sent to the initiator.
• SCSI Residual Over - The number of residual overruns returned to the initiator.
• SCSI Residual Under - The number of residual underruns returned to the initiator.
Viewing iSCSI Statistics
When you select an iSCSI initiator from the discovery-tree, the iSCSI Statistics tab contains statistics
associated with the selected initiator.
To view iSCSI port statistics:
1. Select Host view.
2. Select an iSCSI initiator node in the discovery-tree.
3. Click the iSCSI Statistics tab.
Figure 36: iSCSI Statistics tab
iSCSI Statistics Field Definitions
• Node Roles - The node role for this iSCSI initiator.
Note: No iSCSI information is displayed when using the CIM provider for VMware ESX.