Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 79
Viewing Vital Product Data (VPD)
Viewing VPD
(FC adapters)
The VPD tab displays vital product data (if available) for the selected FC adapter port such as the
product name, part number, serial number and so on.
To view VPD information:
1. Select Host or Fabric view.
2. In the discovery tree, select the FC port whose VPD information you want to view.
3. Select the VPD tab.
Figure 42: FC VPD tab
VPD Table Definitions
• Product Name - Product information about the selected adapter port.
• PN (Part Number) - The adapter's part number.
• SN (Serial Number) - The adapter's serial number.
•VO - Vendor unique data. “V” indicates a vendor-specific field. An adapter may have none, one
or more of these fields defined. Valid values for this field are “VO” (the letter “O”, not the number
zero) and “Vx” (where “x” is a number).
Viewing VPD (OneConnect adapters)
The VPD tab displays vital product data (if available) for the selected OneConnect adapter port such as
the product name, part number, serial number and so on.
To view VPD information:
1. Select Host or Fabric view.
2. In the discovery tree, select the OneConnect NIC, iSCSI or FCoE port whose VPD information
you want to view.
Note: Not supported on systems using CIM provider v1.2.1 on ESX 3i.
Note: Some adapters may show additional VPD information such as EC (EC level) and MN
(manufacturer ID).
Note: Not supported on systems using CIM provider v1.2.1 on ESX 3i.