Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 80
3. Select the VPD tab.
Figure 43: OneConnect VPD tab
VPD Table Definitions
• Product Name - Product information about the selected adapter port.
• PN (Part Number) - The adapter's part number.
• SN (Serial Number) - The adapter's serial number.
•VO - Vendor unique data. “V” indicates a vendor-specific field. An adapter may have none, one
or more of these fields defined. Valid values for this field are “VO” (the letter “O”, not the number
zero) and “Vx” (where “x” is a number).
Viewing Maintenance/Firmware Information
Use the Maintenance or Firmware tabs to view firmware information and update firmware for LightPulse
adapters. For FC/FCoE adapters, you can also configure boot from SAN and change WWPN and
WWNN information for the selected adapter port. (Not available in read-only mode.)
The maintenance/firmware information that is displayed depends upon the type of adapter you select,
FC/FCoE.
Viewing FC Maintenance Information
To view FC firmware information:
1. Select Host or Fabric view.
2. Select an FC adapter port in the discovery-tree.
Note: Some adapters may show additional VPD information such as EC (EC level) and MN
(manufacturer ID).
Note: Not all information is displayed on systems using CIM provider v1.2.1 on ESX 3i. and
CIM provider v2.0 on ESX 4i.