HP Networking RPS/EPS Cross Reference Guide, 2013-10

Product Family
Backup Power
Connectors
600 RPS/EPS
J8168A
610 EPS
J8169A
620 RPS/EPS
J8696A
630 RPS/EPS
J9443A
640 RPS/EPS
Shelf J9805A
zl Power Shelf
J8714A
2600-PWR
1
RPS, EPS RPS, EPS
EPS
1
2610 RPS RPS
2610-PWR RPS, EPS RPS, EPS EPS
2620 / 2620-PPoE+ RPS RPS
2620-PoE+ RPS, EPS RPS RPS, EPS
2800 RPS RPS
2810 RPS RPS
2900 RPS RPS RPS
2910al RPS RPS RPS
2910al-PoE+ RPS, EPS RPS RPS, EPS
2920 / 2920-PoE+
2
RPS+EPS RPS, EPS
3400cl RPS RPS
3500 RPS RPS RPS
3500-PoE RPS, EPS RPS, EPS RPS
3500yl-PWR RPS, EPS RPS, EPS RPS
3500yl-PoE+ RPS, EPS RPS RPS, EPS
5400zl EPS EPS
6200yl RPS RPS RPS
6400cl RPS RPS
8200zl EPS EPS
Legend:
NOTES:
Not Applicable
RPS is 12 VDC to power switch itself
EPS is -50 VDC for PoE power for the 600, 610, and 620
EPS is -54 VDC for PoE/PoE+ power for the 630 and 640
*Document Revision Date: October 10, 2013
HP Switch
© Copyright 2010-2013 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
2) The 2920 Switches employ a single connector that is used for both
RPS and EPS connectivity.
3) Other HP switches that are not listed (for example 1800, 2500)
do not support RPS or EPS.
HP Networking RPS/EPS Cross Reference Guide for HP Switches*
RPS = Redundant Power Supply
EPS = External Power Supply
1) 2600 non-power does not support RPS.
HP Networking terminology:
Supported Backup Power From:
Part Number: 5998-5086