Compaq StorageWorks Getting Started RAID Array 3000 for Microsoft Windows Installation Guide (AA-RACZD-TE, January 2001)

x Getting Started RAID Array 3000 for Microsoft Windows Installation Guide
Chapter 2: Unpacking and Setting Up the RAID Array 3000 Pedestal
■ Site Preparation
■ Unpacking the RAID Array 3000
■ Preparing the Pedestal for Operation
Chapter 3: Unpacking and Setting Up the RAID Array 3000 Controller Shelf
■ Unpacking and Installing the Controller Shelf
■ Preparing the Controller Shelf for Operation
■ Installing the Controller Shelf in a Cabinet
■ Connecting Cables
■ Charging the UPS Battery
Chapter 4: Installing the Host Adapter
■ SWXA3-BD SCSI Host Adapter Description
■ Before you Install SWXA3-BD SCSI Host Adapter
■ Installing the SWXA3-BD SCSI Host Adapter
■ Connecting the SWXA3-BD to the RAID Array 3000 Subsystem
Chapter 5: Preparing Your Host for Use with Your RAID Array 3000
■ Windows NT Preparation
■ Windows 2000 Preparation
Chapter 6: Installing Command Console Client and Creating Your First Virtual
Disk
■ Procedure Summary
■ Installing the Command Console
■ Launching Command Console Client
■ Establishing a Serial Connection
■ Configuring a Single Controller
■ Configuring your RAID Array 3000 for Dual Controller Operation
■ Creating Your First Virtual Disk