Compaq StorageWorks Getting Started RAID Array 3000 for Microsoft Windows Installation Guide (AA-RACZD-TE, January 2001)

Compaq Confidential – Need to Know Required
Writer: Bob Young Project: Getting Started RAID Array 3000 for Microsoft Windows Installation Guide Comments:
Part Number: AA-RACZD-TE File Name: -appa Configuration Records - Blank Forms.doc Last Saved On: 11/28/00 10:08 AM
Appendix A
Configuration Records
Blank Forms
This appendix contains copies of a table to be used to record the configuration
of your system. If additional copies are required, the table can be reproduced.
NOTE: Always document and save your RA3000 RAID set configuration for future
reference. Information on each RAID set and partition – the original LUN number,
controller, host port parameters, and redundancy group – should be readily available if a
problem occurs. Follow procedures outlined in Appendix B to locate the configuration
settings.