Compaq StorageWorks Getting Started RAID Array 3000 for Microsoft Windows Installation Guide (AA-RACZD-TE, January 2001)

HSZ22 Host LUN Mapping Procedure B-3
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: Getting Started RAID Array 3000 for Microsoft Windows Installation Guide Comments:
Part Number: AA-RACZD-TE File Name: -appb HSZ22 Host LUN Mapping Procedure.doc Last Saved On: 11/28/00 10:09 AM
HSZ22 Monitor Utility
MAIN MENU
RAID Set Information
Setup Para
System Inf
RAID Set F
System Fun
Disk Util
Rebuild/Cr
Event Log
UP ARROW: CURSOR UP DOWN ARROW: CURSOR DOWN ENTER: SELECT
CTRL+Z: EXIT
8. Select the host channel to be configured, scroll to the LUNs that have
lost their mapping. A dash (-) represents an unmapped redundancy
group (refer to original configuration information).
NOTE: To prevent incorrect LUN mapping, verify the port connections on each controller.
They should be recorded and saved from the original controller configuration.
Host Parameters
System Parameters
Host LUN Mapping
Disk Parameters
Channel Settings
Rdnt Ctrlr Parameters