Compaq StorageWorks Getting Started RAID Array 3000 for Microsoft Windows Installation Guide (AA-RACZD-TE, January 2001)

Usage Notes and Troubleshooting C-9
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: Getting Started RAID Array 3000 for Microsoft Windows Installation Guide Comments:
Part Number: AA-RACZD-TE File Name: -appc Usage Notes and Troubleshooting.doc Last Saved On: 12/5/00 7:31 AM
Starting Client with Network Connections
To start Command Console Client with network connections to your storage
subsystems, click StorageWorks Command Console in
Start|Programs|Command Console.
You can also type the following line at a command prompt on Windows NT
and Windows 2000 to start the Client with network connections:
\path_to_client_directory\swcc.exe -d your_host_system your_host_subsystem
where -d your_host_system your_host_subsystem is an
optional set of parameters that enables you to specify a system and a
subsystem to start Client. If you specify these parameters, Client opens with
the system selected and the subsystem displayed in the Storage Window. If
Client is not already aware of the system and the subsystem, it adds them to
the Navigation Tree.