Compaq StorageWorks Getting Started RAID Array 3000 for Microsoft Windows Installation Guide (AA-RACZD-TE, January 2001)

Compaq Confidential – Need to Know Required
Writer: Bob Young Project: Getting Started RAID Array 3000 for Microsoft Windows Installation Guide Comments:
Part Number: AA-RACZD-TE File Name: d-ch3 Unpacking and Setting Up the RAID Array 3000 Controller Shelf.doc Last Saved On: 12/4/00 2:28 PM
Chapter 3
Unpacking and Setting Up RAID Array
3000 Controller Shelf
This chapter contains unpacking and general setup information for the RAID
Array 3000 Controller Shelf. This information must be used in conjunction
with the RAID Array 3000 Controller Shelf Hardware User’s Guide and the
installation guide for the BA356 device expansion shelf to properly install the
Controller Shelf in your storage system.
Unpacking and Installing the Controller
Shelf
The shipping container provides maximum protection for the shelf and all
components. We recommend that you unpack the unit in the installation area.
NOTE: Before unpacking the equipment, inspect the shipping carton for signs of external
damage. Report any damage to the local carrier and to your sales representative.
Open and unpack the controller shelf shipping container. Remove the plastic
bag and carefully place the shelf on a flat surface (Figure 3–1). Replace all
packing material in the shipping container and store for future use.