Compaq StorageWorks Getting Started RAID Array 3000 for Microsoft Windows Installation Guide (AA-RACZD-TE, January 2001)

Compaq Confidential – Need to Know Required
Writer: Bob Young Project: Compaq StorageWorks Getting Started RAID Array 3000 for Microsoft Windows Installation Guide Comments:
Part Number: AA-RACZD-TE File Name: e-ch4 Installing the Host Adapter.doc Last Saved On: 11/28/00 10:14 AM
Chapter 4
Installing Host Adapter
In preparing your array for first time use, you need to connect your system to
the RAID subsystem through a host adapter board. This chapter provides
instructions for preparing, installing, and connecting the host adapter.
SWXA3-BD SCSI Host Adapter Description
The host adapter qualified for use with your StorageWorks RAID Array 3000
for Windows NT is the SWXA3–BD Ultra-Wide Differential SCSI Host
Adapter, shown in Figure 4
−1. See Table 4−1 for the exact specifications of
the qualified host adapter.