Compaq StorageWorks Getting Started RAID Array 3000 for Microsoft Windows Installation Guide (AA-RACZD-TE, January 2001)

Preparing Your Host for Use with Your RAID Array 3000 5-3
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: Getting Started RAID Array 3000 for Microsoft Windows Installation Guide Comments:
Part Number: AA-RACZD-TE File Name: f-ch5 Preparing Your Host for Use with Your RAID Array 3000.doc Last Saved On: 11/28/00 10:14 AM
To install the HSZDISK.SYS driver:
■ Locate the CD-ROM disk labeled RAID Array 3000 Solution SW for
Windows NT. It contains the HSZDISK.SYS driver.
■ The HSZDISK.SYS driver is installed using the HSZ install utility. The
HSZ utility installs the driver, checks the event log for miniport and
class driver errors, and also checks the SCSI adapter driver version.
Install the HSZDISK.SYS driver by performing the following steps:
1. Insert the CD-ROM into your CD-ROM drive.
2. Run File Manager or Windows Explorer.
3. Navigate to the folder: CD\DRIVERS\HZINSTAL\
4. Double-click Setup.
5. Follow the instructions in the Setup program to complete the
installation; the installation process copies the driver into the correct
subdirectory and creates the necessary registry entries.
6. Reboot the system.