Compaq StorageWorks Getting Started RAID Array 3000 for Microsoft Windows Installation Guide (AA-RACZD-TE, January 2001)

Preparing Your Host for Use with Your RAID Array 3000 5-5
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: Getting Started RAID Array 3000 for Microsoft Windows Installation Guide Comments:
Part Number: AA-RACZD-TE File Name: f-ch5 Preparing Your Host for Use with Your RAID Array 3000.doc Last Saved On: 11/28/00 10:14 AM
To install the SWXA3-BD device driver:
NOTE: Your adapter package includes the required adapter-specific software. Use only
the adapters and drivers supplied with the adapter kit since these are tested and certified
to function with the RAID Array 3000 Controller (HSZ22).
Windows 2000 discovers “new hardware” on bootup. Follow the prompts
displayed by “New hardware discovered Wizard”. Windows 2000 will identify
and install the driver.
1. Follow the instructions in the Setup program to complete the
installation; the installation process copies the driver into the correct
subdirectory and creates the necessary Registry entries.
2. From Computer Management click Rescan Disks. All devices on the
RA3000 subsystem will be identified in the Disk Management Window.