Compaq StorageWorks Getting Started RAID Array 3000 for Microsoft Windows Installation Guide (AA-RACZD-TE, January 2001)

Compaq Confidential – Need to Know Required
Writer: Bob Young Project: Getting Started RAID Array 3000 for Microsoft Windows Installation Guide Comments:
Part Number: AA-RACZD-TE File Name: h-ch7 Completing Your Storage Configuration Under Windows NT.doc Last Saved On: 11/28/00 9:51 AM
Chapter 7
Completing Your Storage Configuration
Under Windows NT
This chapter contains instructions for completing your configuration using the
Windows NT 4.0 Disk Administrator (for Windows 2000 see Chapter 8).
Completing Your Configuration under
Windows NT
This section summarizes how to use the Windows NT Disk Administrator to
complete a new StorageWorks Storage Subsystem Array configuration under
Windows NT. For additional information, refer to your Windows NT
documentation. Before you begin, remember to safeguard critical data. Back
up your system using normal backup procedures before altering device
partitions.
In order for Windows NT to recognize new StorageWorks Storage Subsystem
devices or changes to existing configurations, you must reboot your system to
restart Windows NT. If you have not already done so, reboot the system at this
time.