Compaq StorageWorks Getting Started RAID Array 3000 for Microsoft Windows Installation Guide (AA-RACZD-TE, January 2001)

Completing Your Storage Configuration Under Windows NT 7-3
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: Getting Started RAID Array 3000 for Microsoft Windows Installation Guide Comments:
Part Number: AA-RACZD-TE File Name: h-ch7 Completing Your Storage Configuration Under Windows NT.doc Last Saved On: 11/28/00 9:51 AM
Starting the Disk Administrator
On the NT 4.0 Desktop, click the Start button and from the Programs menu
select Administrative Tools (Common), then select Disk Administrator to run
the Disk Administrator program. A representative example of a Disk
Administrator screen is shown in Figure 7–2.
NOTE: The first time you run Disk Administrator after adding new disks, one or more
message window(s) may appear asking you to confirm whether you want to have Disk
Administrator provide its signature on the new disks. Confirm doing so (by clicking Yes) in
order to have Disk Administrator recognize these new disks. For more information on this
subject, refer to your Windows NT documentation.
Figure 7-2. Disk administrator screen display