Compaq StorageWorks Getting Started RAID Array 3000 for Microsoft Windows Installation Guide (AA-RACZD-TE, January 2001)

Compaq Confidential – Need to Know Required
Writer: Bob Young Project: Getting Started RAID Array 3000 for Microsoft Windows Installation Guide Comments:
Part Number: AA-RACZD-TE File Name: j-ch8 Completing Your Storage Configuration Under Windows 2000.doc Last Saved On: 11/28/00 9:57 AM
Chapter 8
Completing Your Storage Configuration
Under Windows 2000
This chapter contains instructions for completing your configuration using the
Windows 2000 Disk Manager.
Completing Your Configuration under
Windows 2000
This section summarizes how to use the Windows 2000 Disk Manager to
complete a new StorageWorks Storage Subsystem Array configuration under
Windows 2000. For additional information, refer to your Windows 2000
documentation. Before you begin, remember to safeguard critical data. Back
up your system using normal backup procedures before altering device
partitions.
In order for Windows 2000 to recognize new StorageWorks Storage
Subsystem devices or changes to existing configurations, you must reboot
your system to restart Windows 2000. If you have not already done so, reboot
the system at this time.