Compaq StorageWorks RAID Array 3000 Cluster Solutions for Microsoft Windows Installation Guide (EK-NT0EK-IG. C01, January 2001)

Cabling the RAID Subsystem Cluster Components 3-3
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: RAID Array 3000 Cluster Solutions for Microsoft Windows Installation Guide Comments:
Part Number: EK-NT03K-IG. C01 File Name: d-ch3 Cabling the RAID Subsystem Cluster Components.doc Last Saved On: 12/4/00 11:27 AM
7. Attach the other end of the UltraSCSI cable to the remaining SCSI hub
port.
HOST A
DS-DWZZH-03
UltraSCSI HUB
(3-Port, VHDCI)
HOST B
RAID 3000
Subsystem
(rear view)
HD68-Pin Host
Adapter
HD68-Pin Host
Adapter
SHR-1074
BN37A-05
Host Port 0
BN38E-0B
VHDCI-to-HD68-Pin
Adapter Cable
BN38E-0B
VHDCI-to-HD68-Pin
Adapter Cable
BN37A-05
VHDCI-to-VHDCI
UltraSCSI Cable
BN37A-05
VHDCI-to-VHDCI
UltraSCSI Cable
Figure 3-1. Pedestal hub-radiant raid cluster layout
NOTE: In this cluster layout, termination is internal to the SCSI hub.