Compaq StorageWorks RAID Array 3000 Cluster Solutions for Microsoft Windows Installation Guide (EK-NT0EK-IG. C01, January 2001)

Software Setup Requirements for a Cluster 4-11
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: RAID Array 3000 Cluster Solutions for Microsoft Windows Installation Guide Comments:
Part Number: EK-NT03K-IG. C01 File Name: e-ch4 Software Setup Requirements for Windows NT.doc Last Saved On: 12/4/00 11:25 AM
2. Highlight a (RAID Array ) partition and select Assign Drive Letter.
The Assign Drive Letter window appears displaying the next available
drive letter, similar to the window in Figure 4-7.
Figure 4-7. Driver letter availability
3. Click OK if you want to assign the selected drive letter. Otherwise,
click the Assign drive letter radio button. Select another drive letter
from the pick list and click OK. If the letter you want to assign does not
appear in the list, Windows NT may have already assigned that letter to
the CD
−ROM drive. You can unassign that letter from the CD−ROM to
free it for use.
4. At the Confirmation dialog box, Click Yes. The partition now appears
with the specified drive letter designator.