HP P6000 Replication Solutions Manager Job Command Reference (T3680-96090, October 2012)
SnapcloneHostVolumeToContainers ( "\\HostA2\/usr/cats", ("\\ArrayA2\CatsContainer", WAIT
)
Solaris
SnapcloneHostVolumeToContainers ( "\\HostA2\/dev/disk/dsk100c",
("\\ArrayA2\CatsContainer", WAIT )
Tru64 UNIX
Windows
SnapcloneHostVolumeToContainers ( "\\HostA2\E:\", ("\\ArrayA2\CatsContainer", WAIT )Drive
SnapcloneHostVolumeToContainers ( "\\HostA2\E:\pets\cats", ("\\ArrayA2\CatsContainer",
WAIT )
Drive & folders
Comments
• Associated validation commands. ValidateHostVolume, ValidateSnapcloneHostVolume.
• Agent and license prerequisites. Requires a host agent. Requires a local replication license
for the storage system on which the underlying storage volume (presented source) is located.
• Command result value. List of snapclone storage volume names (UNC). For a complete list,
see Command result values.
• OS specifics. Yes. See examples.
Tru64 UNIX. When this command is used with AdvFS volumes that have heavy I/O, HP
recommends briefly suspending the I/O before the replication step. See Suspending I/O
before replicating AdvFS volumes.
• Some storage volumes that underlie a host volume cannot be copied using snapclone
replication. See the HP P6000 Replication Solutions Manager User Guide for snapclone
guidelines.
• This command can be used with the CreateHostVolume command to re-create a host volume
from one enabled host on another enabled host.
• This command cannot be used with some older versions of controller software. For information
on controller version feature support, see the HP P6000 Enterprise Virtual Array Compatibility
Reference.
• See Resource names and UNC formats.
SnapcloneHostVolumeToContainersInManagedSet
Creates preallocated snapclones (point-in-time copies) of the storage volumes (virtual disks) that
underlie a host volume, by using containers in a managed set. The snapclone copies are presented
to the enabled host and a host bus scan is performed to identify the presented storage.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
SnapcloneHostVolumeToContainersInManagedSet ( %hostvol_unc_name%, %managed_set_of_containers%, NOWAIT
)
UNC Host Volume Name (%hostvol_unc_name%). Select or enter the UNC name of the host volume
to be copied.
Managed Set Name (%managed_set_of_containers%). Select or enter the name of the managed
set in which the virtual disk containers are members.
Wait Flag. Select WAIT or NOWAIT. See Wait/nowait argument.
Job commands 173