HP P6000 Replication Solutions Manager Job Command Reference (T3680-96090, October 2012)
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
ConvertStorageVolumeIntoContainer ( %storvol_unc_name% )
UNC Storage Volume Name (%storvol_unc_name%). Select or enter the UNC name of the storage
volume to be converted to a container.
Examples
ConvertStorageVolumeIntoContainer ( "\\ArrayA2\Cats" )
Comments
• Associated validation commands. ValidateStorageVolume.
• Agent and license prerequisites. None.
• Command result value. Container name (UNC). For a complete list, see Command result
values.
• OS specifics. None.
• This command cannot be used with some older versions of controller software. For information
on controller version feature support, see the HP P6000 Enterprise Virtual Array Compatibility
Reference.
• See Resource names and UNC formats.
ConvertStorageVolumesInManagedSetIntoContainers
Converts storage volumes (virtual disks) in a managed set into storage containers.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
ConvertStorageVolumesInManagedSetIntoContainers ( %managed_set_of_containers% )
Managed set of containers. Select or enter the name of the managed set in which the storage
volumes (virtual disks) are members.
Examples
ConvertStorageVolumesInManagedSetIntoContainers ( "svol_cats" )
Comments
• Associated validation commands. None.
• Agent and license prerequisites. None.
• Command result value. List of container names (UNC). For a complete list, see Command
result values.
• OS specifics. None.
• This command cannot be used with some older versions of controller software. For information
on controller version feature support, see the HP P6000 Enterprise Virtual Array Compatibility
Reference.
• See Resource names and UNC formats.
Job commands 93