HP P6000 Replication Solutions Manager Job Command Reference (T3680-96090, October 2012)

AutoSuspend On Link Down. Select or enter a mode. Choices are true (enabled) and false (disabled).
IO Mode. Select or enter the I/O mode. Choices are synchronous and asynchronous.
Async Type. Select or enter the Async Type used when IO Mode is set to asynchronous. Choices
are ASYNC_TYPE_NULL, ASYNC_TYPE_BASIC and ASYNC_TYPE_ENHANCED. The
ASYNC_TYPE_NULL option simulates current default behavior.
Examples
CreateDrGroup ( "DrGrpPets", "\\ArrayA2\Cats", "ArrayB7", "", "", SAME, "", "", 10, FALSE, ASYNCHRONOUS,
ASYNC_TYPE_BASIC )
Comments
• Associated validation commands. ValidateStorageSystem, ValidateStorageVolume.
• Agent and license prerequisites. Requires remote replication licenses on the source and
destination storage systems.
• Command result value. DR group name (simple). For a complete list, see Command result
values.
• OS specifics. None.
• Guidelines apply. See the HP P6000 Replication Solutions Manager User Guide for remote
replication guidelines.
• The maximum number of virtual disks per DR group and other properties are controller software
dependent. See the HP P6000 Enterprise Virtual Array Compatibility Reference for more
information.
• Values for the following properties can be specified in the CreateDrGroup command. These
properties can be changed later, in another job, by using the commands shown.
Default values
Job commandDestinationSourceProperty
SetDrGroupAutoSuspendFalse (disabled)False (disabled)Auto suspend
SetDrGroupMaxLogSize0 (no max)0 (no max)Maximum log disk size
SetDrGroupName**Name (of DR group)
SetDrGroupIoModeSynchronousSynchronousI/O mode (write mode)
* The name of the source DR group is specified in the CreateDrGroup command. By default the name for the destination
DR group is the same as the source.
• Values for the following properties cannot be specified in the CreateDrGroup command. These
properties can be changed in the same job, or in another job, by using the commands shown.
Default values
Job commandDestinationSourceProperty
SetDrGroupCommentsblankblankComment
SetDrGroupDestinationAccessNone (no I/O)None (no I/O)Destination access mode
SetDrGroupFailsafeDisabledDisabledFailsafe mode
(failsafe on unavailable member)
SetDrGroupFailsafeOnLinkDownPowerUpEnabledEnabledFailsafe on link-down/power-up
Job commands 99