HP StorageWorks Reference Information Storage System V1.0 Administrator Guide (May 2004)

PCC Views, Detailed Descriptions Chapter 2: Persist Control Center
HP StorageWorks Reference Information Storage System Administrator Guide, April 2004 2-103
Host Information
The Host Information view provides status information for a given host, as
described in the following table.
Table 2-107: Host Information View Features
Feature Description
heading Full and abbreviated names of this host, as well as host IP address.
For example:
• SmartCellMachines:sc-s1-172-1.mycorp.com – Full host name
• sc-s1-172-1 – Abbreviated host name
• 10.0.172.1 – IP address
• SmartCellMachines:1 – This is the first host in host group
SmartCellMachines
Host State
Statistics
The amount and percentage of time this host has had each host status
value, and the total time. See
Host Status Value Definitions , page 1-6.
Host
Commands
To run a command to perform an action on this host, click the
corresponding command link. This displays the External Command
Interface view for the command – see
External Command Interface ,
page 2-114.
Note: Commands that disable (notifications, status checks, and so on)
override commands that enable. For example, suppose you disable
checks for all services on a particular host using the Host Information
view (command Disable checks of all services on this host), but you enable
checks for all services on all hosts using the Nagios Info view (command
Start executing service checks). Services for the particular host are
not
checked, because disabling overrides enabling.