HP StorageWorks Reference Information Storage System V1.0 Administrator Guide (May 2004)

PCC Views, Detailed Descriptions Chapter 2: Persist Control Center
HP StorageWorks Reference Information Storage System Administrator Guide, April 2004 2-107
Related Views
• For information on global commands that affect all services, see Nagios
Info
, page 2-39.
• Comments , page 2-36.
Service State
Information
Status information for this service:
• Current Status; Status Information – Current service status value;
additional status information.
• Last Check Time; Next Scheduled Active Check – Times of the latest and
next scheduled status checks.
• Current Attempt – Number of successful attempts, and total number
of attempts, to check this service.
• Latency – Time elapsed from when the latest service check was
scheduled to when it was executed.
• Check Duration – Duration of the latest status check.
• Service Checks Enabled? – Whether or not this service gets checked
for status. You can change this with the associated service
command (see Service Commands, above).
• Last State Change; Current State Duration – Time this service last
changed status value; how long it has had the current status value.
• Last Host Notification; Current Notification Number – Time and number of
the latest notification from this service.
• Service Notifications Enabled? – Whether or not notifications are
currently enabled for this service. You can change this with the
associated service command (see Service Commands, below). This is
overridden by the global Enable/Disable Notifications command – see
Nagios Info , page 2-39.
• In Scheduled Downtime? – Whether or not the current time is
scheduled downtime for the host of this service.
• Last Update – Time this service was last checked.
(Last Check Type, State Type and Percent State Change are
not used by the
PCC.)
Table 2-110: Service Information View Features (Continued)
Feature Description