HP StorageWorks Reference Information Storage System V1.0 Administrator Guide (May 2004)

PCC Views, Detailed Descriptions Chapter 2: Persist Control Center
HP StorageWorks Reference Information Storage System Administrator Guide, April 2004 2-41
Commands with an adjacent X icon ( ) or check-mark icon ( ) are
toggles. The new toggle state (after command execution) is indicated by the
icon: a check mark means enable or start; an X means disable or stop. For
example, after you use the command
Enable notifications , notifications are
enabled and the command
Disable Notifications replaces Enable notifica-
tions
in the Process Commands box.
Click a command link to display the
External Command Interface view for the
command – see
External Command Interface , page 2-114.
Commands that disable (notifications, status checks, and so on) override
commands that enable. For example, suppose you disable checks for a
particular service such as
PING using the Service Information view (command
Disable checks of this service ), but you enable checks for all services using the
Nagios Info view (command Start executing service checks ). The particular service
(
PING ) is not checked, because disabling overrides enabling.
Related Views
• For information on commands that affect only specific host groups,
hosts, and services, see
Hostgroup Commands , Hostgroup Information ,
page 2-100;
Host Commands , Host Information , page 2-103; and Service
Commands
, Service Information , page 2-106, respectively.
• You can disable notifications for a single host or service over a defined
period by scheduling downtime for it – see
Downtime , page 2-37.
Table 2-43: Links To the Nagios Info View
Origin Link
left menu Nagios Info
Table 2-44: Links From the Nagios Info View
Destination Link
External Command Interface , page 2-114 command (See Process
Commands Box
.)