HP Reference Information Storage System Version 1.6 Administration Guide revision 2 (T3559-90809, September 2007)
Validating file from command line
Enter the HPPSTInit command with parameters to validate an Archive Request file:
<install_path>/HPPSTInit /i ArchiveRequestFileName.xml /o LoadLogFile-
Name.log [/c
] [/v5 ]
Parameter
Description
/i Required. Na m e of input file to be processed.
Replace ArchiveRequestFileName.xml with the full UNC path and XML
file name.
/o Required. Na
me of Archive Request Loader log file to which diagnostic and
processing information is written.
Replace Loa
dLogFileName.log with the full UNC path an d log file name.
/c Optional. Parses XML structure in input file for syntax and file accessibility only.
No records are added to PST.MDB for processing.
/v Optional. Verbosity level used when processing Archive Request file. Enter a
number from 0 to 5 following the /v to indicate verbosity level, 5 containing
the most detail.
• 0: Fatal
• 1: Alert
• 2: Warning
• 3: Information
• 4: Trace
• 5: Debug
PST Import Monitor
Use PST Import M on itor to:
• Start a nd stop the import process.
• Displ
ay an overview of running tasks, message counts, and other status information showing
import progress.
• Draw attention to potential error conditions.
• Gener
ate reports.
• Reset failed processes.
Using PST Import Monitor
1. To run PST Impor t Monitor, select one of the following methods:
• Select Start > Programs > Hewlett-Packard > RISS PST Importer > Im port Monitor.
• From the command line, enter the following command: < install_path >/HPPSTStats.
The following window appears:
90 PST Importer