Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

158 Fabric OS Message Reference

53-1000437-01

FW-1009

Message <timestamp>, [FW-1009], <sequence-number>,, INFO, <system-name>, <Label>, value

has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.

Probable Cause Indicates that the state of the power supply has changed from faulty to functional, or from

functional to faulty.

Recommended

Action

If the power supply is functioning correctly, no action is required.

If the power supply is functioning below the acceptable boundary, verify that it is seated correctly in

the chassis. Run the psShow command to view the status of the power supply. If the power supply

continues to be a problem, replace the faulty power supply.

Severity INFO

FW-1010

Message <timestamp>, [FW-1010], <sequence-number>,, WARNING, <system-name>, <Label>, is

below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>

<Unit>.

Probable Cause Indicates that the power supply is faulty. The power supply is not producing enough power.

Recommended

Action

Verify that you have installed the power supply correctly and that it is correctly seated in the

chassis. If the problem persists, replace the faulty power supply.

Severity WARNING

FW-1011

Message <timestamp>, [FW-1011], <sequence-number>,, INFO, <system-name>, <Label>, is

above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>

<Unit>.

Probable Cause Indicates that the power supply is functioning properly.

Recommended

Action

Set the high boundary above the normal operation range.

Severity INFO