Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

172 Fabric OS Message Reference
53-1000437-01
FW-1128
27
FW-1128
Message <timestamp>, [FW-1128], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of segmentations has changed from a value outside of the acceptable
range to a value within the acceptable range. Segmentation changes might occur due to:
Zone conflicts.
Domain conflicts.
Segmentation of the principal link between two switches.
Incompatible link parameters. During E_Port initialization, ports exchange link parameters.
Rarely, incompatible parameters result in segmentation.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1129
Message <timestamp>, [FW-1129], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of zone changes has changed. Zone changes occur when there is a
change to the effective zone configuration.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1130
Message <timestamp>, [FW-1130], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of zone changes has fallen below the low boundary. Zone changes occur
when there is a change to the effective zone configuration. A low number of zone configuration
changes means that the fabric is functioning normally.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO