Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

Fabric OS Message Reference 179
53-1000437-01
FW-1168
27
FW-1168
Message <timestamp>, [FW-1168], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Probable Cause Indicates that the number of signal losses that the port experiences has changed. Loss of signal
generally indicates a physical problem.
Recommended
Action
Check both ends of your cable connection. Verify that the cable and small form-factor pluggables
(SFPs) are not faulty.
Severity INFO
FW-1169
Message <timestamp>, [FW-1169], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of signal losses that the port experiences has fallen below the low
boundary. Loss of signal generally indicates a physical problem.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation. A low number of signal loss errors means that the switch is functioning
normally.
Severity INFO
FW-1170
Message <timestamp>, [FW-1170], <sequence-number>,, WARNING, <system-name>, <Port Name>,
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of signal losses that the port experiences has risen above the high
boundary. Loss of signal generally indicates a physical problem.
Recommended
Action
Check both ends of your cable connection. Verify that the cable is not faulty.
Severity WARNING