Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

Fabric OS Message Reference 191
53-1000437-01
FW-1243
27
FW-1243
Message <timestamp>, [FW-1243], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of end-to-end (EE) cyclic redundancy check (CRC) errors has changed
from a value outside of the acceptable range to a value within the acceptable range. Invalid CRC
messages occur when the number of CRC errors in Fibre Channel frames for specific source ID
(S_ID) and destination ID (D_ID) pairs change. These messages might also be caused by dirty
equipment, temperature fluctuations, and aging equipment.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1244
Message <timestamp>, [FW-1244], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of end-to-end (EE) word frames that the switch receives has changed.
Receive performance messages appear due to the number of word frames that travel from the
configured S_ID to the D_ID pair.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1245
Message <timestamp>, [FW-1245], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of end-to-end (EE) word frames that the switch receives has fallen below
the low boundary. Receive performance messages appear due to the number of word frames that
travel from the configured S_ID to the D_ID pair.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO