Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

240 Fabric OS Message Reference
53-1000437-01
HAMK-1004
29
HAMK-1004
Message <timestamp>,[HAMK-1004], <sequence-number>,, INFO, <system-name>, Resetting
standby CP (double reset may occur).
Probable Cause Indicates that the standby control processor (CP) is being reset due to a loss of heartbeat. This
message is typically seen when the standby CP has been rebooted. Note that in certain
circumstances a CP may experience a double reset and reboot twice in a row. A CP can recover
automatically even if it has rebooted twice.
Recommended
Action
No action is required.
Severity INFO