Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

Fabric OS Message Reference 313
53-1000437-01
Chapter
53
PLAT System Messages
PLAT-1000
Message <timestamp>, [PLAT-1000], <sequence-number>, FFDC, CRITICAL, <system-name>,
<Function name> <Error string>
Probable Cause Indicates that nonrecoverable PCI errors have been detected.
Recommended
Action
The system will be faulted and might automatically reboot.
If the system does not reboot, then try issuing the reboot command from a command-line prompt.
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave
command and contact your switch service provider.
Severity CRITICAL
PLAT-1001
Message <timestamp>, [PLAT-1001], <sequence-number>,, INFO, <system-name>, Resetting
standby CP (double reset may occur)
Probable Cause Indicates that the standby CP is being reset. This message is typically generated by a CP that is in
the process of becoming the active CP. Note that in certain circumstances a CP may experience a
double reset and reboot twice in a row. A CP can recover automatically even if it has rebooted
twice.
Recommended
Action
No action is required.
Severity INFO