Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

324 Fabric OS Message Reference

53-1000437-01

RCS-1004

Message <timestamp>, [RCS-1004], <sequence-number>,, ERROR, <system-name>,

Application(<application name>) not registered.(<error string>)

Probable Cause Indicates that a specified application did not register with RCS.

Recommended

Action

Run the haShow command to view the HA state.

Run the haDisable and the haEnable commands.

Run the rcsInfoShow command to view RCS capability on the fabric. RCS is supported in Fabric OS

v2.6, v3.1 and greater, v4.1 and greater.

Run the firmwareDownload command to upgrade the firmware for any switches that do not support

RCS.

Severity ERROR

RCS-1005

Message <timestamp>, [RCS-1005], <sequence-number>,, INFO, <system-name>, Phase <RCS

phase>, <Application Name> Application returned <Reject reason>, 0x<Reject code>.

Probable Cause Indicates that a receiving switch is rejecting an RCS phase.

Recommended

Action

If the reject is in ACA phase, wait several minutes and then retry the operation from the sender

switch.

If the reject is in the SFC phase, check if the application license exists for the local domain and if

the application data is compatible.

Severity INFO