Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

Fabric OS Message Reference 343
53-1000437-01
SEC-1040
63
SEC-1040
Message <timestamp>, [SEC-1040], <sequence-number>,, ERROR, <system-name>, Invalid
portlist (
<port list>). Cannot combine * with port member in the same portlist.
Probable Cause Indicates that the port list contains the wildcard asterisk (*) character. You cannot use the asterisk
in a port list.
Recommended
Action
Enter the port list values without any wildcards.
Severity ERROR
SEC-1041
Message <timestamp>, [SEC-1041], <sequence-number>,, ERROR, <system-name>, Invalid port
member <port member> in portlist (<port list>). <Reason>.
Probable Cause Indicates that the port member is invalid for one of the following reasons:
• The value is not a number.
• The value is too long. Valid numbers must be between one and three characters long.
• The value cannot be parsed due to invalid characters.
Recommended
Action
Use valid syntax when entering port members.
Severity ERROR
SEC-1042
Message <timestamp>, [SEC-1042], <sequence-number>,, ERROR, <system-name>, Invalid
index/area member <port member> in portlist (<Port list>). Out of range (<Minimum
value> - <Maximum value>).
Probable Cause Indicates that the specified index or area member is not within the minimum and maximum range.
Recommended
Action
Use valid syntax when entering index or area numbers.
Severity ERROR