Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

358 Fabric OS Message Reference
53-1000437-01
SEC-1095
63
SEC-1095
Message <timestamp>, [SEC-1095], <sequence-number>,, ERROR, <system-name>, Deleting FCS
policy is not allowed.
Probable Cause Indicates that there has been a corruption during the distribution of the security database. This can
only occur when the primary fabric configurations server (FCS) is distributing the security database
to the other switches in the fabric and local validation finds that there is an error in the security
database. This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should
be in the ready state. If a switch is in the error state, the database might not be correctly updated
for that specific switch.
Severity ERROR
SEC-1096
Message <timestamp>, [SEC-1096], <sequence-number>,, ERROR, <system-name>, Failed to
delete <policy name> because <reason text>
Probable Cause Indicates that a policy cannot be removed because deleting it would result in invalid security policy
configuration.
Recommended
Action
Verify the security policy configuration requirements and remove any policies that require the policy
you want to remove first.
Severity ERROR
SEC-1097
Message <timestamp>, [SEC-1097], <sequence-number>,, ERROR, <system-name>, Cannot find
<active or defined> policy set.
Probable Cause Indicates that the specified policy could not be found.
Recommended
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity ERROR