Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

Fabric OS Message Reference 411
53-1000437-01
SULB-1034
66
Severity WARNING
SULB-1034
Message <timestamp>, [SULB-1034], <sequence-number>, AUDIT, ERROR, <system-name>,
Firmwaredownload timed out.
Probable Cause The error may be caused by a switch initialization issue after the internal image is relocated. It may
also be caused by an internal Ethernet issue or by persistent storage failure.
Recommended
Action
Reboot the switch. This will cause the internal image to be relocated again. Use the
firmwareDownloadStatus to monitor the progress. If the problem persists, contact your switch
service provider.
Severity ERROR
SULB-1035
Message <timestamp>, [SULB-1035], <sequence-number>, AUDIT, ERROR, <system-name>, An
error has occurred during relocation of the internal image.
Probable Cause Indicates that an error has occurred during the relocation of the internal image. The error may be
caused by inconsistent internal firmware image. It may also be caused by the internal Ethernet or
persistent storage hardware failure.
Recommended
Action
Reset the switch. This will cause the internal image to be relocated again. If the problem persists,
contact your switch service provider.
Severity ERROR
SULB-1036
Message <timestamp>, [SULB-1036], <sequence-number>,, INFO, <system-name>, <The Version
being logged><Version String>
Probable Cause Indicates the firmware version running in the system. This is generally logged before download and
after download of the firmware to store version information.
Recommended
Action
No action is required.
Severity INFO
SULB-1037
Message <timestamp>, [SULB-1037], <sequence-number>, AUDIT, INFO, <system-name>, HCL
failed. Reboot the switch manually using the reboot command. However, it will
disrupt the FC traffic.